Vulnerabilities
QNAP urges urgent Plex update after hackers exploit Plex2Shell flaws
QNAP warns users to update Plex Media Server on NAS devices after attackers exploited a chain of vulnerabilities known as Plex2Shell. Compromised devices may need a full reinstall and credential reset.
Ross Grant3 min read

The short version
Hackers are breaking into QNAP storage devices by exploiting flaws in Plex Media Server, a popular app for streaming media. QNAP says users should update Plex right away. If your device was accessible from the internet and running an old version, you may need to reinstall everything and reset your passwords. Only one security news site has reported this so far.
What happened?
QNAP has warned users that attackers are exploiting a chain of vulnerabilities in Plex Media Server, known as Plex2Shell, to compromise NAS devices. The company urges users to update Plex immediately and follow extra steps if their device was exposed to the internet. Only Security Affairs has reported this so far, and QNAP is assisting affected users.
How the flaw works
Attackers have been exploiting a set of four vulnerabilities in Plex Media Server, known together as Plex2Shell, to compromise QNAP NAS (Network Attached Storage) devices. According to Security Affairs (opens in a new tab), these flaws (CVE-2026-96652, CVE-2026-96654, CVE-2026-96655, CVE-2026-96656) allow attackers to run their own code on a vulnerable Plex server without needing valid login details, as long as certain conditions are met.
The vulnerabilities relate to how Plex loads shared libraries for its transcoding feature. The software does not check the name, permissions, or signature of the library, so an attacker can trick Plex into loading a malicious file. This lets the attacker's code run with the same privileges as the Plex service, which can be enough to install malware or other unwanted software.
Technical details and proof-of-concept code were published by researcher Zach Main on 16 October 2026. Within a day, attackers were seen using the exploit in the wild, including against honeypots (test systems set up to attract attacks). Some attacks installed cryptocurrency-mining malware and proxy tools.
Who is affected
The vulnerabilities only affect Plex Media Server running on QNAP NAS devices. QNAP's main operating systems (QTS and QuTS hero) are not themselves vulnerable, but any NAS running a vulnerable version of Plex is at risk. Users who have exposed Plex to the internet, for example by enabling Remote Access or forwarding port 32400, are especially at risk. QNAP has received reports from users whose Plex installations were compromised.
The response
QNAP has urged all users to update Plex Media Server through the QNAP App Center to version 1.43.3 or later. Users should also check in Plex Web (under Settings > General) that the installed version is 1.43.3.10861 or later. The company warns that updating alone does not remove malware if the device was already compromised.
If Plex was accessible from the internet and running version 1.43.2 or earlier, QNAP recommends treating the NAS as potentially compromised. Users should follow QNAP's FAQ for a clean reinstall, check for signs of compromise, and reset both Plex and NAS credentials. Disabling Remote Access and avoiding port forwarding for port 32400 is also advised. If remote access is needed, QNAP suggests using a VPN instead.
CISA (the US Cybersecurity and Infrastructure Security Agency) added the Plex2Shell flaws to its Known Exploited Vulnerabilities catalogue on 20 October 2026, urging federal agencies to address them by 23 October 2026.
What you should do
- Update Plex Media Server to version 1.43.3 or later immediately.
- If your NAS was exposed to the internet while running an older version, perform a clean reinstall and reset credentials.
- Disable Plex Remote Access unless absolutely necessary. If you must have remote access, use a VPN.
- Keep your NAS operating system and all apps up to date.
- Review QNAP's FAQ for step-by-step remediation instructions.
Why it matters
NAS devices often store important files and backups. If attackers gain control, they can install malware, steal data, or use the device for further attacks. The speed at which these flaws were exploited shows how quickly public exploits can put users at risk.
Key points
- Attackers are exploiting Plex2Shell flaws in Plex Media Server on QNAP NAS devices.
- Exposing Plex to the internet increases the risk of compromise.
- QNAP urges immediate updates and extra steps if the device was accessible online.
- Updating does not remove malware if the device was already compromised.
- CISA has listed the flaws as known exploited vulnerabilities.
Sources
Security Affairs
Reference

